This week in science, we worked in teams to create a water bottle insulator that kept the water inside the bottle the coldest for the longest amount of time. First, we planned what we would need, how we would build it, and sketched our first design. Next, we tested our design to see how well our insulator worked. Below you will see the results and how we will improve our first insulator to make it even better!
An insulator is…
An insulator is an object that slows heat down.
Here is a picture of our original design:
The materials we used were…
aluminum, water bottle, and fabric.
Results! What was the temperature of your water to begin with? After 15 minutes? After 35 minutes?
Time | Temperature (in Fahrenheit) |
0 minutes | 54 degrees |
After 15 minutes | 57 degrees |
After 35 minutes | 61 degrees |
The engineering process includes thinking about how to make your design better and re-building your product. The improvements that we will make to our insulator are…
We will use a wire.
These changes will improve my insulator because…
Metal is a good insulator and wire and metal are almost the same.
New results:
Time | Temperature (in Celcius) |
0 minutes | 7 |
After 15 minutes | 10 |
After 35 minutes | 11 |
Sincerely,
msteigmann
If you were to do this experiment again, are there any changes you would make to your insulator to improve it further?